Rip Off Britain

Many years ago, I had a Psion Series 3 handheld… remember them?

I loved anything gadgety and the Series 3 fitted the bill nicely.

When it was superceded by the Series 3A, I immediately went out and bought one, even though it wasn’t that much of an upgrade.

As I remember, it cost about three hundred quid at the time.

And I was amazed, when Mrs M and I went on a shopping trip to New York just a few weeks later, to see the very same device being sold for almost half the price!

I wouldn’t have minded so much, but the damn thing was designed and built in Britain, so how can it be so much cheaper in a different country?

Fast forward to today: I was mooching through some ham radio videos on YouTube, and in one of them, someone – an American chap – showed how to build an interesting project using a Raspberry Pi, and in his video, he showed how all the parts could be sourced from Amazon. He even showed the actual Amazon pages, so one could be sure of buying the right parts.

Intrigued, I noted them all down and then went to the UK Amazon site. I then found all the parts and totalled up the price.

It worked out to be fifty quid more than what this guy paid for it in America!

The Raspberry PI itself made up over half of that difference: 64 pounds in the UK, but only 37 in the US… 27 quid cheaper!

Again, the Pi was designed in Britain.

It is a hugely successful British product.

And whilst some are made in China and Japan, the bulk of the forty million or so that have so far been sold around the world, have been made in the UK.

So why the hell are we that live in the UK having to pay so much more?

Let there be light… after a short while

A few weeks back, half a dozen of us took a ride up to a café, on the A10, near Royston.

It’s a popular haunt for biker’s and – on a sunny Sunday morning – it was pretty busy, even with the Covid restrictions meaning that we all had to eat outside on the limited number of benches available.

But we did.  And it was good.  And then we left.

Except that we didn’t. Because my bike refused to start.

CLICK, it went. CLICK.

I had to suffer the ignomy of being pushed, in order to do a bump start, in front of dozens of fellow bikers.

This is only the second time this has happened in the nine years I have owned the bike, but even still…

Doing some research into this problem, I learned that it’s a well-known (not to me it wasn’t!) issue, within the Triumph Bonneville community, which is generally referred to as “The Dreaded Click”.

One suggestion I found, was to fit a switch on the headlights to save on current draw when starting (I think many modern bikes aren’t fitted with an on/off switch nowadays, as having the headlight on permanently is seen as a safety feature, so they have removed the ability to turn it off). I saw several examples where people had fitted a switch onto the headlight housing.  There was no way, I was going to ruin my beautifully chromed headlight housing, by drilling a hole in it. There is a headlight cut-out relay fitted to most bikes nowadays, for this very reason, but it seems they don’t always work.

So, instead, I made a small timer board. That’s it in the picture at the top of this post. Wrapped in self-amalgamating tape to keep it dry and also to prevent any shorts against the metalwork, this fits easily inside the headlight housing and keeps the headlights off for about fifteen seconds from when the ignition is switched on.

The circuit is simple and I built it onto a small scrap of stripboard that I had lying around. The rest of the components were from my bits box, apart from the relay. I decided to by an automotive relay as they are water-resistant – a fiver from my local auto parts store. Also, they can handle higher current than the piddly little relays I have to hand – I measured the headlight current draw at 4A.

The positive connection to the headlight main beam was cut and put in series with the normally closed contacts on the relay. I decided to do it that way, so that the headlight would have power, should the circuit fail for any reason.

Power for the circuit was taken from the sidelight, using a couple of Scotchlok connectors to tap into the wiring.

Total cost?  Well, I had most of the parts, but I reckon about six quid.

On a ride up to Jack’s Hill last Sunday, it worked perfectly.

I thought I’d post the idea here for anyone else having the same issue.

Of course, I can’t be held responsible if you bodge it and blow all the fuses on your bike!

Archive woe

At the top of this page, just below the header, are several links.

One of these links says “Archive”.

This takes you to my old pre-2017 pages, should you wish to read drivel older than that which I am writing at the moment.

Problem is: it doesn’t work properly anymore. It used to be OK, so I don’t know what has happened.

Clicking on the link initially looked like it took you nowhere – just a black screen – but I found the posts were actually there if you scrolled down.

However, they were a right mess, with “Get Magic Quotes is deprecated” written all over the page.

My ISP provider confirmed there was nothing wrong server-side, and there was little they could do except roll back to a daily backup from last week.  Problem is, I think this issue has been there for several months, so that wouldn’t be any good.

With the help of Google, I spent several hours yesterday, tinkering with my wp-includes file and that has improved things and has removed most of that deprecated magic quotes nonsense, but it’s still not right.

On top of that, when I log in, my Dashboard has disappeared, meaning I can do bugger all with it, pretty much.

And I can’t even remember how I set this all up – OK, I know it’s only just over three years ago, but with my memory being what it is nowadays, that seems like eons.

I think – assume – that I would have set it up on a separate MYSQL database from the main blog. It did have it’s own theme, so that seems logical.

Captain.

But then, it would have had to have it’s own sub-domain, surely, and I can’t find any evidence of that.

I am at a loss now and will need to seek expert help, so if anyone out there is a bit of a WordPress guru…

 

 

 

Under attack

In recent months, the software that I use to protect this site from malicious attacks, has seen a marked increase in the number of attempts that have been made to ‘get at it’ – to use a term I am sure is often cited in the computer tech world.

Why anyone should want to get at my humble little site, is a mystery to me.

But it is concerning.

Our resident expert in such things, assures me that there is most likely nothing to worry about. as it’s probably just bots doing their thang.

I have taken relevant precautions: changed the default login name and password to something which would be far more difficult to crack and stuff like that, but it still concerns me, as the attacks seem to be on the increase. Was it something I said, I wonder?

And then yesterday, I got the report shown in the pic above.  342 in ten minutes! This is getting silly.

Dave, as you can see, it’s over your way, could you have a word?

 

 

What a packet

Whilst rummaging about up in the loft the other day, looking for… I can’t remember what, I stumbled upon my old AEA PK-88 Packet TNC.

You remember them, right?

All the big boys were running PK-232 units, but they were too costly for me. The cheaperPK-88 served it’s purpose well, though.

Back in the late 80’s, I’d gotten very interested in the X.25 protocol used to send data packets around a telecoms network and so, when some bright spark developed a version that could be used in amateur radio in the early 90’s – AX.25 – I of course decided to get involved.

Back then, packet communications was all the rage and hundreds of us set up nodes and digipeaters at home, forming a radio mesh that allowed packets to travel up and down the country, in much the same way as companies like BT were doing.  Our packets tended to be just routine messages (like an email), rather than the commercial data that travelled over X.25. Of course, our amateur network lacked the millions of pounds that the telecoms companies were able to pour into it: it was slower and prone to failure… but it was fun and we learnt a lot about network routing.  Looking back at it now, I realise just how much I have forgotten, over the years.

But anyway…  amateur packet was pretty much killed off by the internet and so I wondered what I could use my old TNC for.

Not much, according to Google.

But, a version of amateur packet is still alive, in the form of the Automatic Packet Reporting System.   Unlike the old system, APRS tends to be more localised, with guys broadcasting beacons, detailing local weather and shit like that.  All a bit pointless, but I wondered whether I would be able to use my ancient TNC to pick up APRS packets and decode them.

And so, after much fiddling about with RS232 cables and PuTTY and a bit of soldering, I was rewarded with the picture on the right.  Success!!

I am pretty chuffed at having figured out how to get it to decode the packets, after nearly thirty years.

Next step is to see if I can actually transmit any.

Watch this space… if you can be arsed.

It took it’s time

Some of you may remember the post I made six years ago, about the proposed mission to the asteroid Bennu, and how I arranged for my kids names to be engraved onto a chip that travelled with the spacecraft.

Well, for those of you who may have missed it, Osiris-Rex made contact with Bennu yesterday, making an extraordinary smash ‘n’ grab of the asteroid’s surface.

It has now started it’s long journey home… not arriving until 2023.

It blows my mind to think that the names of my children (and many others, but I’m not really interested in them, to be honest) now exist – however small – two hundred million miles away (that’s further away from us than the Sun) and will quite possibly outlast us all.

Guess what…

… I got up to this Bank Holiday weekend.

Well, we did our bit for the economy, by Eating Out To Help Out and then spending a further couple of hundred quid on footwear – new walking boots for Daughter and myself and then a stupid amount of money spent on new sandals (yes, the old faithful’s have had to be replaced: still plenty of years left in them, but sadly, our trip to Cornwall left my increasingly debilitating feet crying out for something more comfortable and so I have finally given in to the family’s wishes).

But, I aided the economy further still – well, I added to the lining of Jeff Bezoz’ pockets – by doing a complete PC rebuild.

Having been rock solid for years, Deep Thought 7 started playing up a little while back… I even dismissed the occasional Blue Screen Of Death as a minor inconvenience: “It’ll sort itself out”.

But, it didn’t, and once it started happening more often, it became evident that something needed to be done.

And so, I spent several hours updating all my drivers: far too many were out of date.

All that seemed to do, was aggravate it and prompt further and more frequent BSODs.

And then it failed completely; refusing to boot up at all, or allow me to reinstall Windows.

I initially diagnosed the SSD hard drive as the culprit, but a new one (my word, haven’t they dropped in price?) proved me wrong.

Several runs of MemTest86 declared the RAM to all be in order, so that left the motherboard or the processor.

So, time for a complete upgrade, methinks (any excuse).

Three hundred quid later, I have a nice new machine, that seems to run a lot cooler than the old one and is almost silent in operation.

And she’s fast.    Eighteen seconds from pressing the power button to Windows loading and waiting for me to enter my PIN number. 18 seconds!

OK, I know that will slow down quite a bit, once I add the four external USB hard drives; the NAS; the printers; the SDR radio, and the HF radio (Oh god: I’ve got the nightmare of getting all that working again!), but right now, I’m absolutely loving my new toy.

Still annoyed

You know when you build a ringer circuit to drive the bells on an old rotary telephone powered by an Arduino, and you design the veroboard layout, optimising it to get the board as small as possible so it will fit in the phone, and then you spend an hour or so, carefully soldering the components into place and when you’ve finished, you sit back and admire your handiwork before you then connect it to a power supply and check that it works OK, but it doesn’t, because you realise almost immediately that you got the Gate and the Drain the wrong way round on the MOSFETS, but when you try to get them out, you can’t because the board is too densely packed underneath and even with a de-solder pump and some solder wick you can’t get the damn things out and then the tracks start to lift because you applied too much heat for much too long, so you realise that you are now just going to have to throw it away and start again?
You know when you do that?
It’s bloody annoying, isn’t it?

Buzby Nostalgia

Yesterday – May the wunth – was my birthday.

As is usual on my birthday, I bought myself a little present.

That’s it there in the photo on the left.

Ain’t it luverly?

That, my friends,  is an early 1960’s GPO Type 706, as you well know. Beautifully refurbished and fully working. Oh, you should hear her ring – proper bells!

I’d actually wanted a Type 746; y’know, the one with the improved regulator circuit. But I couldn’t find one in red. And I really wanted red.

I actually bought it for a little project I am working on, but I am just so enamoured with it, that I might just leaved it plugged in and sitting on the coffee table in the lounge.

If nothing else, it’s a conversation piece.

Project Phoenix

I was gifted a lovely little radio a while back – a Yaesu FT-270R.

It’s an old 2m model, dating back to the late eighties, I’m guessing.  As such, it lacks CTCSS capability, which limits its use somewhat.

However, there is a space inside to fit a FTS-8 subtone encoder board. And so I thought I’d fit one of these and give it a new lease of life.

Sadly though, the FTS-8 board is no longer available and secondhand ones command a hefty price tag.

What to do? Well, make one of course!

I found an elegant design on the web and built it onto a piece of veroboard. Plugging it into the radio, changed some of the available functions, so the radio obviously detected the board.

It allowed me to choose the subtone from the front panel. Excellent.

But it didn’t work.  Checking  the output with my scope, the tone just wasn’t there… or rather, it wasn’t what it should have been.

I spent ages fiddling with it, but ultimately could find nothing wrong.

And so I passed it onto Dave, who – being a clever bugger – worked out pretty quickly that the board I had built actually worked perfectly. Unfortunately, the radio didn’t. It was giving out the wrong signals to the board.

This wasn’t something that could be easily fixed – possibly a microprocessor issue. And so, I figured a workaround, that would allow the tone to be selected manually, using a combination of switches to produce the binary equivalent of the hexadecimal value that the board was looking for in the tone lookup table.

This worked perfectly and when I tested it, I was successfully able to open several different repeaters, all using different subtones.

And then I found a bug, where the tone would only change after five minutes and not whenever the PTT was keyed.  This looked to be a fault with the MCLR on the PIC… possibly damaged by putting in 7.6 volts from the radio (datasheet states that Vpp shouldn’t exceed Vcc). Not having another chip available, I made a slight mod and fitted a miniature relay, which only allowed the board to be powered when the PTT was depressed.  This seemed to work nicely and I was able to switch tones easily and on-the-fly.

So, I put a call out on a repeater. “Your audio is awful!”, I was told.   I replaced the mic ( a new one from ebay cost fifty quid! Yes, fifty quid for a 30 yr old mic!) with an old YM-47 from an FT-290 and it worked perfectly… once I had figured out the differing wiring scheme.

And so, after many weeks of working on it, on and off, it is ready to be put to use.

Not that I need another radio at the moment, so a friend is going to borrow it.

Many times I nearly gave up on it and was going to throw it away. But, I had invested a lot of time and a reasonable amount of money on it and so I wanted to see it through.

I’m pleased that it is finally finished and working… because that means I can now move onto my next project 🙂

Brain dead

This week, I have been in training.

Learning all about hydraulics and fluid dynamics.

This is a page from my workbook.

You can see where I’ve been using the Hazen-Williams Equation to work out friction losses.

Can’t you?

And today, we have been working on the Benoulli Equation to show how the speed of a fluid will increase or decrease inline with a change in it’s potential energy.

Of course,

I haven’t worked on calculations like this, since I was at college, back in the eighties, so it’s fair to say I’m struggling with it a bit. 

And whilst those around me are all using the calculator function on their phones, I have been using my trusty calculator from my college days.  It’s interesting to see that – like me – it’s not as fast at working out these big sums as its more modern counterparts.

I’m happy to admit, that I’m struggling with it all, a bit.   And even when I think I’ve done one easily and sit back smugly, it normally turns out that I have made a stupid mistake somewhere along the line, which has left me with a result that is nowhere near what it should be.

Whilst I was no Carol Vorderman, or Rachel Riley (I’ve got better legs), I was reasonably good at maths, back in the day.

Where did it all go?

I officially give up! Yet again.

Morse code is an anachronism.

Invented and used in the 1840’s, it seems somewhat out of place in today’s high-speed world, where data rates are so high that whole sentences of text can be sent in the blink of an eye.

It’s an outmoded form of communication, that just doesn’t sit well with modern  methods.

And yet… it does.

It is still used by the military – not necessarily as the main basis of contact nowadays, but certainly as a fallback, I’m sure.

And in the world of Amateur Radio, it is still a much sought-after skill amongst many.

There are plenty of amateurs out there who can do Morse.  Many of them excel at it.  And there are even some that won’t use any other method to communicate over the air.

Sadly, I’m not one of them.

I would LOVE to be able to read morse code, properly.  I can send at slow speeds and I can read it at very slow speeds. Very slow. Very, very slow. Reading is the hard part.

Rather like learning a new language (and ostensibly, that’s what it is), there are many different methods for learning it. Over the years I have tried reading books (Duh!); listening to tapes and listening to other operators sending. I have tried several PC programs and mobile phone apps. I have built machines for practicing with (see picture above), eventually taking them apart and using the bits for another project, because I was getting nowhere.

Frustratingly, in my teens, I did learn how to read and send, and could do so at about five or six words a minute.  If only I’d kept it up.

Similarly, I used to be able to parlez francais to a reasonable degree.

But I allowed them both to lapse and nowadays I struggle to learn either.

And it really annoys me.

I’ll admit that this is partially down to commitment. I don’t seem to have the time nowadays to study for such things.

And the inclination. That’s kind of gone too: I want to learn it, but I don’t want to put in the effort.  Like the rest of the MTV generation (yes, I think I just about fall into that category) and, as Freddie Mercury sang: “I want it all and I want it now”.

And so, after several months of “giving it another go”, I have hung up my headphones.

Again.

For the last time.

That’s it! I have resigned myself to the fact that morse code will forever evade me.

No more, will I try learning and decyphering that strange sound of dits and dahs pouring from my radio speaker.

No more, will I spend hours in the car listening to an 800Hz tone beeping out letters of the alphabet to me.

No more will I drive the family mad, as I sit in my room badly tapping away at a morse key.

No more, will I… who am I kidding? Give it three months and I’ll be back at it for another half-hearted attempt.